Ostukorv
Laen sisu...
Inductor 5KW is a machine for heating ferrous materials with good power and efficiency, creating the heat directly within the metal.
Lack of fire allows the operator to work close to cables, pipes or other heat-sensitive parts.
Oxygen flames lead the metal surface temperature to 3,000 degrees with inevitable change in the characteristics of the metal, induction heating instead generates the heat only in the applied point, the metal can quickly lead to very high temperatures even if 5/600 degrees are sufficient to perform the most common operations of straightening, bending, substitutions of pivots, bearings, brackets, bolts etc.
Technical features:
Power supply: 230 V nominal, 2PH + PE 50 Hz 25 AMP
Degree of protection: IP 21
Frequency: 15 -30 kHz
Adjusting power levels: 5
Input Power: 5.0 kW
Induction cable: 3 m
Cooling system: Liquid cooling
Continuous operating time: approximately 20 min *
Weight: 65 kg with full tank
Water tank capacity: 20 liters
Dimensions (LxWxH): 400x340x1000 H mm
* at 20° C ambient temperature at max. power